Hi..

I'd like to find a way to read a soundfile directly from disk using readsf~, but to specify the starting point of this file for playback.. ie read from 20 secs in instead of always from the beginning. Is this possible using readsf~ or another object? I have been looking at some older threads and realise that this has been an issue for a while. I know that this is possible using the sfplay~ object in max/msp.. is there an equivalent in PD that can do the same??

Thanks in advance for any help..

emeidos

Hi...

Here's a simple but useful patch i made for live performance... as an instrumentalist I've sometimes needed a large clock for synchronisation between myself/an ensemble and a pre-recorded electronics part... (mainly for time-space notated scored music... so not necessarily rhythmic). A short while back godinpants proposed a great solution.. and here's another by triggering changes in the labeling of invisible canvases..

I hope this can be useful to somebody!

emeidos

http://www.pdpatchrepo.info/hurleur/BigClock.pd

Hi guys,

I'm working on a small patch that outputs a bang once a specific incoming pitch has been detected (to trigger an audio file for example). My problem is that I only want the action triggered once within a given time frame.. e.g. 2 seconds.. So say the same specific pitch is detected more than once within 2 seconds, the idea would be to output the bang ONLY ON THE 1ST PITCH... and then after these 2 seconds if this pitch is then re-detected the bang would then be triggered again, with the same 2 second buffer... and so on and so on...

Does this make sense??? I guess I'm looking for some kind of gating or buffering device to prevent the premature re-triggering of an event.

Any help or suggestions welcome!!

Hi all.. another little patch... my first go with using fiddle for detecting incoming pitches... detects sung/played pitches and stores the frequency values into an array for playback via an oscillator: either smoothly in real time, stepwise or randomly. Would like to expand it to properly play back each pitch with its corresponding amplitude envelope mapped to the output of the oscillator.. I know there an attack detector in fiddle back don't know where I'd go from here.. any suggestions??

enjoy!

http://www.pdpatchrepo.info/hurleur/fiddlefun.zip

Hi all... I'm a relatively new user and this is my first upload of anything I've created. It's a simple one-shot sampler and random pulse generator with adjustable tempo.. any thoughts or feedback would be welcome!!!! I've really gotten a lot out of reading posts and checking out patches by all you experienced users so I thought I'd put up a little creation of my own.. included is the parent patch bleepytimes.pd and the guts are in the bleepy.pd abstraction. Enjoy!

emeidos

http://www.pdpatchrepo.info/hurleur/bleepytimes.zip

Hi there,

I'm an instrumentalist that has gotten into working with PD recently for live interactive performance. I have played a few pieces now using Max/MSP to trigger pre-recorded sound events using a pedal, however also quite often I have worked with a large counter in live performance that is viewed from a separate screen to synchronise actions on the score to the running timeline. Is this kind of large counter device possible to contstuct in PD? Ideally I would like to work in a much more interactive and real-time fashion however there are some occasions where strict synchronisation like this is really necessary.

Any ideas, suggestions or even thoughts about this way of working?

Cheers!

Hi....

I'm fairly new to PD and was initially running it through my internal sound card on my iBook g4 (10.3.9) with no problems, and now that I've connected my Mbox (original) I can't seem to get sound to work through this hardware after selecting it in the audio preferences.

Are there any compatibility issues with digidesign mbox and PD? Is there anything that I have forgotten to configure before trying to use my Mbox with PD?

Any help with this would be greatly appreciated!!

Thank you in advance,

emeidos

hey adam..

[change] is good for limiting outputs... only outputs once an input changes... check out the patch attached.. I think this might be what you're after

http://www.pdpatchrepo.info/hurleur/bangbang.pd

thanks saturno!! I wasn't sure about the onset in the help and so stupidly didn't investigate further!!!! Cheers all good now..

thanks hardoff I'll try this now.. can I just say that this forum is really amazing.. it's fantastic to get such great advice from all you guys! Cheers..