ok well
to get everything going i usually am wearing headphones just to test it out
press 1 and 5 to turn on the dsp and get the effects line going
press L to load a wav sample
k to analyze the sample
turn up the volume on the sample looper boombox
now depending on wether or not the the enable reaction box or enable BPM box is connected to the box directly to the left will connect it to a specific bpm or it will react to incoming or playing sound
after switching from box to box i find it makes me turn the boombox on and off so just press 5 and 1 twice
so now turn the filter bank on by pressing F
start talking or making some noise
press the space bar
until you hear whatever sound being frozen then make some sort or loop
press F again when you are done and wait until you see
the loop appear in the odisto array
then press A to analyze that loop turn up the volume in the glitch section
the choice of reaction and BPM has to be the same as the boombox for it to work
correctly
if you use the bpm the green vslider next to the volume will set it
but its not really bpm as much as it is just a way of timing
pressing loop (H) will just make the sections of the loop keep playing over and over
the delay can be used by plugging the bng into the hslider or plugging the ranom box into the hslider if you just plug the bng into it though you would have to manually set the delay amount
in order for the panning to really get interesting you can connect the top bng in the panningreact box to the metro 250 then connect that metro 250 to the bng right below it you can set the speed with the panning speed hslider
the panning yellow box with the car mod index sliders changes the different panning you can turn on by pressing (3)
on both the wah and pitch vslider the inside slider is for the actual amount of wah or pitch change and the outside vslider is for the speed at which it changes if it is turned on (6,7,8,9)
the random pitch (i) random wah is pretty fun for messing round with or you could just manually set the amount of change
the distortion doesn't have to be turned on in oder for it to work only for the slider to give it some power
the shaper gives you amount, depth, limit, and gain controls
and the ASD/size/global
attack/sustain/decay size and global amplitude
the ASD can be used for shaping the sound and the global can be used for a volume control
at this point i would hope this is making a little more sense if not just ask i really just wanted to see if anybody else would use something like this
im also going to post a 6 channel simple looper that i have been messing with that i am starting to like
any input would be awesome
paul
