Hi to every one, I really dont know how to play a file .wav or aiff, the objects that I have been trying are, [oggread~] and [readsf~].

this is what the machine tells me with readsf

error: ruid.wav: no such table
error: ruid.wav: no such table
error: ruid.wav: no such table
error: ruid.wav: no such table
error: ruid.wav: no such table
error: conflicting block~ objects in same page
error: tabwrite~: Sustain_Array: no such array
error: tabplay~: Sustain-_Array: no such array
error: conflicting block~ objects in same page
error: tabwrite~: Sustain_Array: no such array
error: tabplay~: Sustain-_Array: no such array

Here is how I tried
[bang(
l
[openpanel]
l
[soundfiler]
l [start( [stop( [resume(
l/
[readsf~ 2] here also I tried the oggread object
l l
[*~ .5 ][*~ .5 ]
l
[dac~]

In both cases I never heard anything

It sounds like a little/big endian thing. So if it was created on a ppc mac and your trying to open it on an intel then you'll get garbled nonsense. This is one of the reasons i started to use wav in Pd (also because you can't do 32bit float with aiff)

It was created on a mac intel, and running in it, the patch, the aif file dont remember, so the problem is that I'm using a aif file?

Do I need to reconfigure my mac's sound target? but how

And boonier, you recommend to use wav always?

Thanks

@luriaz said:

And boonier, you recommend to use wav always?

Thanks

well it seems to be the industry standard these days - just had less problems in the past with pd

But there is way to play aif fliles or is just imposible, now I can play wav files.

Thanks any way for all the help

No its not impossible to play aif files.

What bit depth is the aif file? If its saved as 32 bit then it won't work. Check the help file for [soundfiler]

Also I'm wondering whether the header might be corrupted somehow.

@radiostarkiller said:

hi, here is an example that shows how to play a .wav with tabread4~ and readsf~

problem in your patch is the missing tables and arrays i'd say.

Radiostarkiller, I'm using your tabread4~ example to play a wav file that's about 12 minutes long and although it seems like it has located the file, an error appears that says 'resize failed'.

How can I resolve this?

Thanks

If you're going to use a file that's over about 6.3 minutes, you'll have to start off with a

Maelstrom, thanks for your quick reply.

I've tried playing the audio file in a slightly different way (see attached file). It's loading and playing the whole thing, but it's about double the speed it should be.

Basically I'm trying to play the 12min track without any alterations, then develop the patch so that data from a kinect will control some parameters of its playback (like speed, eq and reverb).

Should I be using [tabplay~] instead of [tabread4~], or is there a more suitable object you could recommend?

Thanks again (having trouble uploading the pd patch so I've uploaded through Rapidshare).

http://rapidshare.com/files/3455003751/player%20with%20Pieceintheshapeofasquare.pd

try the pd-double release, if you want to get arround the 32bit-float-can't-adress-more-than-6/12-min-tabread4~-problem. Works fine here - macbook pro osx 10.6.8

http://puredata.info/downloads/pd-double