Hello,

For my first post, here is a track played on my DIY Pd based polyphonic modular synthesizer:

This is a live single take, the audio is recorded directly from the analog output and is not processed. What you can hear is the raw sound of this synth.

Eurorack modules are not producing any sound, they are only controllers for Pd which is running sound generation over 8 voices. All knobs and switches positions are transmitted over I2C to an x86 SBC and are converted to OSC protocol to go to Pd. Patch cables are detected and used to setup dynamically the software connections between the different Pd blocks.

Everything is DIY: electronics, firmware, pcb, case, front panels, etc ...

I have been working on this project for two years, and I will need few more months to fill the upper Eurorack frame !

Frederic.

@f1oat
Thank you for sharing!
If you have a website, blog etc would be nice to include the link.

Thanks. In the video description you can find a link to the French speaking forum where I have posted the progress: http://forum.anafrog.com/phpBB/viewtopic.php?f=36&t=18334

I am preparing an English language slideware with more technical details (system diagram, details on software implementation, hardware, etc ...).
It should be available within the coming days.

As the project is mainly related to a dedicated hardware controller, I have open a new thread for technical discussions with the reference to a website where you can find a system description:
https://forum.pdpatchrepo.info/topic/14030/diy-polyphonic-modular-synth

HOT!

Congratulations! I’m excited to listen later!