Hello guys,

So I am creating a 3 channel synth for a university project and am quite new to pure data. I have spent a couple hours trying to troubleshoot it myself however I know when to ask the experts My problem is although I've used a spigot with a toggle on the first osc sound still persists through the channel.
I also have the problem that each time I change frequency The whole channel resets rendering the logic I have used to change waveform null.
I would appreciate any help at all.
thanks a lot

multi channel synth test 2.pd

@Carcin Hello and welcome to the forum.
I have changed osc1 so that it mutes when turned off.......... synth_2.pd
You need to send the frequency, from the output of [mtof] to each (all) of the waveform generator objects..... [osc~] and [phasor~]........ and not to the radio switch.
You will need to use your radio switch logic to control another [*~] with a [line~] object (in the same way that I have done for the whole output)....... one for each waveform generator.
I hope that makes sense.
I have done that just for osc1 ( and disconnected the others until you have them working).
Please check the actual generators are working as expected. It's not my pet subject
David.

That's more than i could ever asked for, thank you so much. I've screenshot this post for reference I

(didn't mean to hit send)
I will get working on it first thing tomorrow, thanks again David.

@Carcin You are very welcome.
You can edit your post (hitting send is not a disaster like in a chat).
The options are behind the little blue wheel below your post.
David.