• flight453

    Thank you! I'll try these methods out and let you know!

    posted in technical issues read more
  • flight453

    Hello everyone!
    I am trying to connect my arduino leonardo, which acts like a midi usb device, to puredata on startup. I can manually connect the device with aconnectgui, but nothing I have tried connects the device on startup.
    I have a thread on raspberry pi forums about this -> Rasberry Pi forum
    Please help me.

    posted in technical issues read more
  • flight453

    Hello.
    Thanks for providing the patch.
    Sadly, this doesn't work for me. I still have to set the midi to alsa from oss(default). I also have to set the number of input and outputs of the midi (in my case 1 in and 1 out).
    I need it to be already configured because the final product of my project won't be hooked up to a keyboard, mouse or monitor at the time. (I'm making a standalone drum kit)
    Thank you!!!

    posted in technical issues read more
  • flight453

    Hello!
    I am using Pd on a raspberry pi 3 and have recently started to make some new projects.
    I have an arduino leonardo acting as a usb midi device, which is working perfectly with the pi and a puredata patch.
    The only problem is, I have to configure the midi and audio everytime I start up Pd.
    That means that I have to select the right options for my sound card, and select alsa midi, then confirm to make 1 input and 1 output port, Every. Single. Time.
    I know that this can be done by changing the text in .pdsettings. But there is a scarcity of how to configure alsa midi in pdsettings. Also I am very new to this, and don't know much about puredata..
    It would be great if you would guide me in the right direction.

    Ps- I looked at the commands at https://puredata.info/docs/faq/commandline
    But couldn't get those commands to work.

    posted in technical issues read more
  • flight453

    @whale-av I even tried the patch without the freeverb~ object. Even then, the delay problem did not change. I guess it has to be the sample rate then. Or could it be the actual delwrite and vd objects and their arguments?

    Anyway, file> preferences> audio preferences shows that my sample rate is 44100 and block size is 64.
    Note that without any delay, the sounds play back without any change.
    Shaurya.

    posted in technical issues read more
  • flight453

    Hello everyone!
    I used a simple audio delay patch in my project using - delwrite~ and a sig~ going to vd~ objects.
    It works fine, but the audio doesn't remain the same after being delayed. The pitch of the audio is always a little higher than the original, even when I feed a 0 to the sig object.
    Am I doing something wrong? I followed this youtube tutorial-

    What am I doing wrong? Please guide me...

    posted in technical issues read more
  • flight453

    @whale-av
    Thank you! Hats off to you and this amazing forum...

    posted in technical issues read more
  • flight453

    Hello developers!
    I am running into some minor problems with using pd. Untitled-1.pd
    In this patch, I am using a text file to load a wav file into an array.

    The text file is-
    1000 abc(the variable which recieves the value) HH2(the value);

    And I am getting some errors. It works when numbers are sent. Please help me.

    posted in technical issues read more
  • flight453

    @4ZZ4 and @ddw_music thanks for helping!!!

    posted in technical issues read more
  • flight453

    @4ZZ4 said:

    @flight453 you didn't implement that on your thread after this on "tecnical issues" though

    Yeah I probably uploaded the wrong file. But don't worry. I have made the changes regarding the [sel] object. Nothing else is different in that patch.:sweat_smile:

    posted in technical issues read more
  • flight453

    @4ZZ4 thank you for answering! I will try out the things you mentioned and let you know:smiley:

    posted in technical issues read more
  • flight453

    Hello!
    drumkitpd.pd
    This is my patch for a midi drum kit. How can I implement velocity sensitivity on/off? I have used [/ 127] objects to turn velocity into a number between 0 and 1 (sincerely, what would I do without you, David). What if I want to toggle velocity sensitivity off? How can I do that? Thank you!

    posted in technical issues read more
  • flight453

    Hello!
    I am using an arduino as a midi device. It is connected via usb. the arduino sends midi notes from 60 to 65 based on sensors.
    drumkitpd.pd
    Take a look at this patch. I have used [moses] for a conditional operator and plays the appropriate sound file. However, when I send a midi note upwards of 60, multiple sounds get played. I guess that [moses] does "=<". I want to have an "=" operator. I tried using [ ==] but the same problem occurred again. maybe I am using it wrong... please help!

    posted in technical issues read more
  • flight453

    Hello!
    Noob question.
    I am using pd vanilla and receiving messages using [netreceive] from python. I can do operations on numbers, but can I do the same with strings or words that I receive over the network?
    Here is what I want to do-
    If (string) = dspOn
    Then turn dsp on.
    Please help!

    posted in technical issues read more
  • flight453

    Thank you so much for helping!

    posted in technical issues read more
  • flight453

    Hello!
    I am using a raspberry pi and puredata to make a drum kit. I have sounds which are read through soundfiler and I activate them by using Gpio inputs via wiringPi.
    Now I am trying to use an arduino to read analog values from the peizoelectric sensors, map them to midi value, and send them via a usb midi cable to puredata.
    That is done, but how will I be able to play back sounds with a volume that is equal to the velocity in the midi packet?
    Example- If I strike the sensor hard, the arduino sends 127 as midi value and puredata should play back a sound at full volume, and if I strike the sensor softly, the sound should play back at less volume.

    Note that I am thinking of having velocity sensitivity, and not aftertouch (would be cool to add later on).

    Regards,
    Shaurya

    posted in technical issues read more
  • flight453

    Hello!
    I am using a raspberry pi. Using an arduino would be a option, but I don't have one right now.
    Even if I did, how would I use it? I am making a drum kit and am using the gpio pins connected to sensors which will be triggers for the audio. How would the arduino be connected to the raspberry pi? I am guessing via midi, but will we be able to use gpio and midi at the same time???
    Thank you
    Shaurya

    posted in technical issues read more
  • flight453

    Hey!
    I tried the patch that you provided! I just have some doubts. First, do I have to create more read_from_abstr patches if I want to play 8 sounds???
    Second, I want 8 sounds to change collectively (in a group). Say "kit1" has eight sounds, "sound1.wav" to "sound8.wav", mapped to 8 gpio pins, and "kit2" has another eight sounds, "sound9.wav" to "sound16.wav". I have not decided on the number of kits, so it has to be variable. Can I do this with the patch you provided? If so, how can this be done? I am very new to puredata...
    Thank you so much.
    Shaurya

    posted in technical issues read more
Internal error.

Oops! Looks like something went wrong!