http://puredata.info/docs/developer/BuildingPdExtendedForRaspberryPiRaspbianWheezyArmhf
Building Pd-Extended 0.43.3 For Raspberry Pi (Raspbian Wheezy)
*Based On Tedbot’s Tutorial – Updated For Raspbian Wheezy
1. Add repositories for the source to aptitude
$ sudo nano /etc/apt/sources.list
2. paste this and save (ctrl+o, Enter)
deb-src http://archive.raspbian.org/raspbian/ wheezy main contrib non-free rpi
ctrl+x to exit
3. Update aptitude
$ sudo apt-get update
4. We need to install build packages
$ sudo apt-get install dpkg-dev build-essential devscripts
5. Get Pd dependencies
$ sudo apt-get install rsync autoconf libfftw3-dev liblua5.1-0-dev swig libvorbis-dev ladspa-sdk libspeex-dev libmp3lame-dev lua5.1 tcl-dev
6. Get the source code (addresses will most likely change in the future so check the forum if links don't work)
$ wget http://blinky.at.or.at:8888/auto-build/2012-10-02/Pd-extended_0.43.3~20121002-source.tar.bz2
$ wget http://blinky.at.or.at:8888/auto-build/2012-10-02/Pd-extended_0.43.3~20121002-source.debian.tar.bz2
7. untar
$ tar xjf Pd-extended_0.43.3~20121002-source.tar.bz2
$ cd pd-extended
$ tar xjf ../Pd-extended_0.43.3~20121002-source.debian.tar.bz2
$ cd ..
7. Build pd dependencies
$ sudo apt-get build-dep puredata gem pdp
8.Remove problematic "-lpd"
$ nano externals/OSCx/configure
Ctrl+w to search for “-lpd” in “linux:” and remove it
Ctrl+o, then press “Enter” to save
Ctrl+x to exit.
$nano externals/OSCx/configure.ac
Search for “-lpd” and perform the same modification
9. let’s build it
$ cd packages/linux_make
-then
$ nohup make install > makeinstall.log &
-monitor it
$ tail –f makeinstall.log
4-5 hrs later it should say: “linux_make install succeeded” Ctrl+c to exit
10. Let’s make the debian package
$ nohup make package > makepackage.log &
-monitor it
$ tail –f makepackage.log
It should say something like: “dpkg-deb: building package pd-extended' in /home/pi/pd-extended_0.43.3/pd-extended/packages/linux_make/Pd-0.43.3-extended-20121010.deb'.” Ctrl+c to exit
11. install (the pd-extended_0.43.3-20121010.deb must match the one just created)
$ sudo dpkg –i Pd-extended_0.43.3-20121010.deb
That should do it! Pd-extended should now be installed. And it should sound like crap.
This is why Miller recommends you run this command:
$ sudo chmod 4755 /usr/bin/pd-extended
Which will give pd root priority (Much better audio output)
