TouchOSC and pd-extended problems
I am trying to gget TouchOSC working with pd-extended but i keep getting this error every time i load my simple-midi.pd file.
error: [OSCroute]: OSCx is deprecated!
Consider switching to mrpeach's [routeOSC]
grid: version 0.8, written by Yves Degoyon (ydegoyon@free.fr)
error: [dumpOSC]: OSCx is deprecated!
Consider switching to mrpeach's [unpackOSC] and [udpreceive]
Anyone know how to switch to mrpeach or can offer any other insight?
Sorry for asking such a noob question...
Yeah make sure you're using an available port. The OSC software has to send and receive on different ports. If you were on Mac using OSCulator I could get into specifics but I haven't tried Windows.
To get mrpeach to load a really simple way is to create a [import mrpeach] object and [bang] it a few times, or [loadbang] it. The OSC objects wont work if the something is open using the same port though.
You don't need to [loadbang] or [bang( the [import] object. It will load the library when it is instantiated.
And don't worry about the Windows message. MIDI works fine.
Good to know. Thanks Maelstorm.
Thanks to the above discussion and [routeOSC-help] I am delighted to be receiving wii data in my PD window. Cheers!
However, I have not succeeded in converting these inputs into numbers that I can connect to any (very basic newbie) patches.
I have tried various things such as [atoi], [ascseq], and various
commands but seem to be missing something (or probably many things 
Can anyone point to an example please? Thanks.
( I would upload a patch that explains my attempts but I have not found the attachment button yet)
hi, i am having the same exact problem. i am trying to connect my ipod touch with TouchOSC to Traktor Pro so i can run DJ wirelessly. I made some templates with touchOSC editor and used hexler's PD generator to create the PD file from my TouchOSC template. This worked for a little while but after generating about a dozen different templates in TouchOSC and having the OSC to PD converter work its magic, something went wrong and I get the same problem as thebozenator, same error message. i have tried to find the "mrpeaches" files but I am unable to locate them. i have the latest version of PD downloaded but am a total noob when it come to PD. someone, please walk me through what I have to do so I can made this work again. Thanks in advance!
Attached is a couple of ways to decode data from the "simple" layout on TouchOSC.
hvm
thanks! I'll see how far i can get. PD is still totally new to me...
Robbm : for the wiimote you can also use the wiilib library
how do you attatch stuff to posts? I can't find the attatch button and I'm hoping someone could take a look at my PD file to tell me where I've gone wrong...
Oh! there it is!
http://www.pdpatchrepo.info/hurleur/Traktor_V1.1.touchosc.pd
Hi smokestack. here is a corrected version of your patch.
I added [unpackOSC] and [pipelist] after [udpreceive].
Also I changed [OSCroute]'s to [routeOSC]'s.
mvh
http://www.pdpatchrepo.info/hurleur/Traktor_V1.1.touchosc-slp.pd
thank you soo much bro! i really appreciate it!!
wow man, I've never been so helped out by someone on the net! works great except for one button but I'm sure that's my fault and has nothing to do with PD. Yall made my day!!!
So now I'm trying to make those changes on a new PD file so my touchOSC template isn't so cluttered. I have the touchOSC editor make me a PD file which i am trying to edit using Pulsed's PD file as an example but I'm getting this error:
error: unpackOSC: no method for '/accxyz'
Sorry to keep bothering yall but what did i do wrong?
http://www.pdpatchrepo.info/hurleur/Traktor_Control_v1.1.touchosc.pd
I think i got it... Finally! thanks for the support guys
I'm also having difficulty with my PD file - I was able to edit it (I think correctly) but haven't been able to receive MIDI from my Ipad via TouchOSC. Would anyone mind taking a look at my PD patch? Thanks!
http://www.pdpatchrepo.info/hurleur/traktor_layout.touchosc.pd
Thanks! However, for some reason I still can't receive any MIDI signal. I've checked my network settings & everything checked out, even disabled firewall but to no avail. Any other thoughts other than adding [import mrpeach]?
Guys sorry for being a total retard.
But I am too trying to use touchOSC with DJ Software in Win7 but when I load a custom patch, created by touchosc2pd.jar, It gives the same error.
error: [dumpOSC]: OSCx is deprecated!
Consider switching to mrpeach's [unpackOSC] and [udpreceive]
OSCroute object version 1.05 by Matt Wright. pd: jdl Win32 raf.
OSCroute Copyright ﾩ 1999 Regents of the Univ. of California. All Rights Reserved.
error: [OSCroute]: OSCx is deprecated!
Consider switching to mrpeach's [routeOSC]
I added mrpeach to startup but PD failed to open it.
Then I added unpackOSC and udpreceive and then mrpeach. PD loaded mrpeach no problems, but when I ran my patch, it produced the same error.
I am totally lost. Every step of the way touchOSC provides extreme difficulties for me. By the way the patch that I am trying to generate is not a custom one, but merely the patch for mix2ipad, which is one of the two default layouts of touchOSC for ipad.
Edit*** I attached my patch file.
MAJOR EDIT***
Ok, so I looked at the previous attachments, and corrected my pd file. I added udpreceive 8000, unpackOSC, pipelist and declare - lib mrpeach and import mrpeach.
I still can not get midi signals, PD won't respond to my ipad.
What do i do?
FINAL EDIT***
Lol! I got it working, I removed the declare command and opened the dj software, to see my touchOSC inputs generate midi responses. Thanks to all of you!!!
i'd hate to pile on, but i'm having the very same issue... PD is very new to me, and i spent a hwhile just getting the midi yoke str8 and getting midi response. The default layouts just aren't working for me, and i want something that'll mimic my old midi hardware on touch osc. I get to the point of using touchosc2pd-v1.1 to make my layout for PD to map my 6 page layout, and it makes the pd file for me.... When i run it i get the same errors about mrpeach etc, and i'm kinda at wits end... not sure how to run mrpeach within PD's interface and/or swap out OSCroute to routeOSC..... yet...
Can someone please help steer me or change the patch up so i can use this iPod touch 3rd gen? It's a SICK layout for my 3 deck setup that i spin with, but is also versatile enough to go on the road with me and would wow people
Edit: I got it running!!! stoked... I appreciate all the info and posts that have guided me!!! I got this custom layout thing done!!!
alright... here's a question...
After beta testing what layouts work the best with what i'm trying to do, i'm curious if it's possible to put a fader or rotary on two different pages that's assigned to the same midi channel
Reason i ask is that i'd like to use FX beat parameter on two different pages. I gotta assume it's possible, but i'm not really sure how one would route it on the patch as i've learned alot in the small time i've taken with puredata, but not that.... any ideas?
Oops! Looks like something went wrong!
